INDUSTRIAL COATINGS
CEIL-IT I WHITE ACOUSTICAL CEILING TILE RESTORER-AEROSOL
1-591
CEIL-IT I Makes ceiling tiles look like new. It covers water stains and smoke discoloration. CEIL-IT I will not cause warping and avoids costly replacement or complete re-painting. CEIL-IT I is quick dying and has a low odor, no surface preparation required.
DEFENSE EF METAL PARTS PROTECTOR-AEROSOL
1-554:
DEFENSE EF is a USDA authorized metal parts protector. Quickly coats metal parts, castings, winches, pulleys, tools, dies, pipe threads, hoists, jigs and riggings. Gives indefinite indoor protection and long-lasting outdoor protection. Transparent amber color is easily seen through while showing its application. Sets up to a hard yet flexible coating in 2 hours. To remove, use kerosene or mineral spirits. Weldable and paintable. Does not contain chlorinated or fluorinated solvents.
PROTECTOR-RUST CONVERTER AND COATING
5-9855:
PROTECTOR is a rust converter and protective coating that performs two operations at one time. First rust is converted from iron oxide to ferrous oxide, a black organic complex. Then, a clear acrylic coating is formed. The surface can be left as is or painted over using latex or oil based paint. The coating formed by the product is sufficient to last for years without painting. Can virtually be used on all rusted surfaces. Apply this ready to use product with a brush or swab.
ENDURE-HIGH SOLIDS INDUSTRIAL COATINGS-AEROSOL
0-T93000: GLOSS WHITE
This is a high solid industrial coating with a low solvent, maximum quality and performance formulation. It has single coat hiding power, and saves time and money. One 20oz size can (16oz net wt.) covers the equivalent of four economy brand low solids, 16oz size cans. ENDURE paints were tested best in corrosion protection against the competition by an independent laboratory. They have outstanding hardness and durability, and resist abrasion and heat.
ALSO AVAILABLE FLAT WHITE 0-T93001:
GLOSS BLACK 0-T93002: FLAT BLACK 0-T93003:
SAFETY ORANGE 0-T93004: SAFETY RED 0-T93005:
SAFETY GREEN 0-T93006: SAFETY BLUE 0-T93007:
SAFETY YELLOW 0-T93008:
NO SWEAT COLD PIPE INSULATION-AEROSOL
0-T77015:
NO SWEAT is a spray on coating designed to prevent condensation on cold water pipes, refrigeration lines and coils, condensers, valves and valve fittings. NO SWEAT insulates and prevents moisture build up on water tanks, ice machines and duct work.
QUICK-ZINC GALVANIZE COATING-AEROSOL
1-570:
QUICK-ZINC is a high quality, high solids, heavy duty zinc coating designed to give superior corrosion protection. Prevents rust by galvanic action, dries to a flexible coating that bends without chipping. Can be used as a protective final coating or primer wherever iron or steel will be exposed to atmospheric or corrosive conditions.
RUST EXTERMINATOR-AEROSOL
0-T96512:
RUST EXTERMINATOR eliminates rust stops corrosion and can be painted. It chemically neutralizes rust and leaves a tough, long term, rust preventative coating. Seals, protects and prolongs the life of ferrous metal. Rusted area turns to a black protective finish. The protective barrier, upon curing can be painted if desired. RUST EXTERMINATOR is authorized by U.S.D.A. for use in federally inspected meat and poultry plants.
ENDURE STAINLESS STEEL COATING-AEROSOL
0-T97512:
A super tough, high-temperature, corrosion preventative coating. Contains overlapping stainless steel flakes which bond to the surface with polyurethane chemical-resistant resin. Provides protection as well as beautification.
SUREFOOT SLIP RESTANT EPOXY COATING-AEROSOL
0-T91012: CLEAR
SUREFOOT is a super hard, texturized, one part epoxy coating that quickly cures to a slip resistant rough grit surface. SUREFOOT aids in the reduction of slip and fall accidents. SUREFOOTS unique aerosol contains a special synthetic grit with no sharp edges. One application lasts for months depending on traffic.
ALSO AVAILABLE: 0-T91112 GRAY
0-T91212 YELLOW
0-T91312 BLACK
THERMAL-HEAT RESISTANT HIGH TEMPERATURE PAINTS-AEROSOL
This thermal paint withstands continuous temperatures up to 1200 degrees F (649 degrees C). It forms a super durable porcelain-like bond on surfaces at high temperatures and offers excellent resistance to gasoline, rust, salt spray, oil, grease.
AVAILABLE IN: 0-T93101 FLAT WHITE, 0-T93103 FLAT BLACK AND 0-T93110 ALUMINUM
|
|
|