INDUSTRIAL PRODUCTS AND LUBRICANTS
ACC ACID COIL CLEANER-PHOSPHORIC ACID
0-101:
ACC COIL CLEANER is designed for air conditioner and refrigeration coils.This phosphoric acid based cleaner removes dust, dirt, grime and grease from aluminum or copper coils and fins of cooling units and air conditioners. When used regularly, it keeps coils clean to promote more efficient operation and lowers the power consumption of air conditioner and refrigeration units.
BIG RED PREMIUM NON-MELT MULTI-PURPOSE E.P. GREASE
1-L103:
BIG RED GREASE is used for hundreds of automotive, marine, industrial and agricultural applications. Extreme pressure additives give resistance to shock and impact. Does not liquefy at high temperatures like soap based greases, yet remains pumpable at low temperatures. Forms a protective film resisting rust and corrosion. Resists chemical breakdown and oxidation. Waterproof will not wash out, even with boiling water or steam.
BIO-CIDE MICROBICIDE FOR COOLING TOWER WATER
0-637:
This liquid additive prevents biological fouling and controls the build-up of algae and bacteria in recirculating commercial and industrial water-cooling towers. It features a broad- spectrum micro biocide that reduces the growth of fungi, slime and other organic deposits. It can be applied to systems by slug addition at fill concentration, or mixed at lower dilution rates for routine maintenance or customized applications.
BOILER COMPLETE TREAT H
0-901:
This liquid additive features a multifunctional formula with alkalinity builders, oxygen scavengers, sludge dispersants and corrosion inhibitors to offer superior water treatment. It was designed for use in hard water systems and can be used with an automated continuous feed system. It also travels along with the stream with the system to protect steam and condensate plumbing and it operating in top condition.
BOILER COMPLETE TREAT S
0-1960:
This all in one liquid soft water boiler treatment features a multifunctional formula with the entire necessary chemical for complete treatment in one convenient liquid. It combines hardness control with oxygen scavengers and a volatile amine corrosion inhibitor that travels along with the steam to protect both the steam and condensate plumbing. It can be used with an automated continuous feed system, and is safe to use with other boiler chemicals.
BOILER TREAT H SCALE & CORROSION INHIBITOR
0-903:
This liquid additive was designed to prevent the deposition of lime, scale, rust and other minerals in large water-treatment boilers. It was designed for use in hard water systems, or mixed with other boiler treatment chemicals on a weekly maintenance schedule.
BOILER TREAT S
0-1958:
This liquid steam boiler additive is a phosphate-based cycle treatment fortified with a proven polymeric scale inhibitor. It was designed for use in soft water environments and can be used with an automated continuous feed system. It is safe to use with other boiler treatment chemicals, especially steam line treatments and oxygen scavengers.
CBC CIRCUIT BOARD CLEANER-AEROSOL
1-514:
CBC CIRCUIT BOARD CLEANER has a fast evaporation rate and is residue free,
The dielectric rating is to 25,000 volts and is ozone safe and has no CFCs or HCFCs.
CBC CIRCUIT BOARD CLEANER is safe to use on plastics, rubber and metal. Use to remove dirt, oil, and grime from circuit boards, computers, magnetic tapes, printed circuits, gauges, switches and relays.
CLEARLUBE II PENETRATING TEFLON LUBE-AEROSOL
1-581:
CLEARLUBE II is a non-staining clear Teflon lubricant designed to penetrate tight tolerances and form a tenacious lubricating film. CLEARLUBE II withstands high temperatures and resists water washout.
PROTECTOR-RUST CONVERTER AND COATING
5-9855:
PROTECTOR is a rust converter and protective coating that performs two operations at one time. First rust is converted from iron oxide to ferrous oxide, a black organic complex. Then, a clear acrylic coating is formed. The surface can be left as is or painted over using latex or oil based paint. The coating formed by the product is sufficient to last for years without painting. Can virtually be used on all rusted surfaces. Apply this ready to use product with a brush or swab.
DESCALER 3000- HEAVY DUTY COOLING TOWER DESCALER
5-11561:
This concentrated phosphoric acid cleaner quickly and safely removes heavy lime and scale build-up from a wide variety of surfaces. It features a concentrated formula that can be used at full strength, or diluted for custom cleaning jobs. Plus it cleans without the dangerous fumes and other hazards normally associated with strong cleaners.
D-GREAZ ORGANIC SOLVENT DEGREASER-AEROSOL
1-500:
D-GREAZ was developed to give industry a safer way to clean grease, tar, oil and grime from electrical and mechanical equipment. This concentrated formula contains no chlorinated or fluorinated solvents making it an ideal product to use in environmentally conscious situations or where highly toxic products are not suitable. Authorized by the USDA for use in federally inspected Meat and Poultry Plants.
DRY-SLIDE DRY SILICONE FOOD GRADE LUBE-AEROSOL
1-531:
This dry silicone spray-food grade is designed to lubricate equipment used in packaging and processing industry. It leaves a non staining dry pure silicone film to lubricate moving parts, reducing friction and wear. DRI-SLIDE is heat stable from -400°F to 450°F. DRI-SLIDE is also formulated as a release agent on seals and gaskets of tank closures. DRI-SLIDE lubricates all sliding surfaces except those you wish to paint. Excellent on RV slide outs. Use on sticking metal, wood, rubber and plastic. Apply to cutting tables, conveyors, heat sealing equipment and slicing equipment. Waterproofs leather, canvas, rubber and chrome surfaces. Safe on all plastics. Contains no methylene chloride. DRI-SLIDE won’t melt, freeze, gum or become rancid.
DRY-TEF DRY FILM LUBRICANT-TEFLON®-AEROSOL
0-T81010:
A clean, inert, multi-purpose, dry film lubricant and release agent. Provides microscopic film-forming properties more slippery than silicone. Dries to a light Teflon® powder in minutes. Burnishes into metal surfaces for superior lubrication.
E-Z GLIDE SILICONE LUBRICANT-AEROSOL
1-537:
E-Z GLIDE is a USDA authorized multi-purpose silicone spray lubricant. The no-flammable formula is safe to use in most plant areas. E-Z GLIDE uses a high viscosity silicone for extremely long lasting lubrication and protection. E-Z GLIDE is NON-CONDUCTIVE to 28,000 volts. E-ZGLIDE is stable at temperatures up to 4000 F.
GEAR LUBE EF OPEN GEAR LUBRICANT-AEROSOL
1-542:
OPEN GEAR LUBRICANT is a tar base lubricant. This thick tacky fluid stays on the gear where it is needed, has a high temperature stability to 175o F plus. Special formula allows material to stretch, insuring contact with all gear surfaces.
GREASE GUN NON-MELT SPRAY GREASE-AEROSOL
1-572:
GREASE GUN is a USDA authorized high temperature, non-melting, inorganic red grease which will withstand temperatures up to 5000F. It sprays out as a liquid that transforms into thick grease in minutes. GREASE GUN contains a high- pressure additive that reduces wear and extends operating life of all parts and machinery. GREASE GUN prevents seizing and loosens frozen parts. It contains no Chlorinated or fluorinated solvents making it more environmentally friendly than its counterparts.
KOOL-METAL WORKING SYNTHETIC COOLANT & LUBE CONCENTRATE
0-303:
KOOL-METAL is a water-dilutable coolant and lube it is designed for use with all ferrous and non-ferrous metals in cutting, grinding, turning and other machining operations. When diluted, it makes a clear solution to give the operator an unobstructed view of the work piece. Its synthetic formula does not contain silicone or sulfur, and is enhanced with corrosion inhibitors to prevent flash rusting until the piece is painted.
KOOL CUT CUTTING TOOL LUBRICANT-AEROSOL
1-584:
KOOL CUT is a specially formulated coolant for cutting tools. This product will lubricate and cool. Reduces friction in threading, drilling, tapping and reaming applications. Does not contain carbon tetrachloride or sulfur. Non- Flammable.
LOCK-MATE DRY SILICONE SPRAY-AEROSOL
1-1544:
LOCK-MATE is a dry silicone spray designed to lubricate locks, mechanisms, tumblers, and all sliding surfaces. Leaves a non-staining dry pure silicone film to lubricate all moving parts, reducing friction and wear. This product is heat stable from -450° F 450°F. Because of the purity of the dry silicone lack of petroleum carriers LOCK-MATE will not dust, gum up, or freeze. LOCK-MATE contains no methylene chloride and is food grade for use in all areas.
LOOP TREAT NITRO
0-1983:
This liquid scale and corrosion is designed for use in either hot or cold water closed loop recirculating systems. It features a borate/nitrate formula for superior scale and corrosion inhibition, with easy testing and control. It can be injected directly into the recirculating system through the use of a bypass feeder, or applied by use of mild steel piping and feeding equipment.
LOOP TREAT POLLY
0-1984:
This organic polymer based liquid scale and corrosion inhibitor is designed for use in either hot or cold water closed loop recirculating systems. It features a phosphate-based formula with a polymer dispersant for anti-precipitating and sequestering harmful hard- water scale. It can be injected directly into the recirculating system through the use of a bypass feeder, or applied by use of mild steel piping and feeding equipment.
SUPER DRY MOLY DRY LUBRICANT SPRAY-AEROSOL
1-544:
SUPER DRY MOLY is a USDA authorized dry film lubricant containing molybdenum disulfide, fast drying with minimal transfer. Service temperatures range from minus 200 F to 10000 F. Ideal for those lubricating jobs when a liquid lubricant cannot be used.
MOLY TUFF PREMIUN NON-MELT MULTI-PURPOSE MOLY GREASE
1-L102:
MOLY TUFF is multi-purpose moly grease for hundreds of automotive, marine, industrial and agricultural applications. Extreme pressure additives give resistance to shock and impact. Does not liquify at high temperatures like soap based greases, yet remains pumpable at low temperatures. Forms a protective film resisting rust and corrosion. Resists chemical breakdown and oxidation. Waterproof, will not wash out-even with boiling water or steam.
MR. GREEN PREMIUM LITHIUM E.P. GREASE WITH MOLY
1-L104:
MR. GREEN is multi-purpose non-melt grease for hundreds of automotive, marine, industrial and agricultural applications. An organic moly additive gives high resistance to shock and impact. Does not dry out after use as some clay based greases do. Remains pumpable at low temperatures. Forms a protective film resisting rust and corrosion. Resists chemical breakdown and oxidation, Waterproof. Will not wash out.
MR. MECHANIC LUBRICANT-AEROSOL
1-534:
MR. MECHANIC is a USDA authorized greaseless lubricant for general use. Contains a light mineral oil in a petroleum distillate base with a corrosion preventative for long lasting protection. Cleans, lubricates, penetrates and prevents rust giving four-way protection.
NO SWEAT COLD PIPE INSULATION-AEROSOL
0-T77015:
NO SWEAT is a spray on coating designed to prevent condensation on cold water pipes, refrigeration lines and coils, condensers, valves and valve fittings. NO SWEAT insulates and prevents moisture build up on water tanks, ice machines and duct work.
NUCHAIN CHAIN & CABLE LUBE WITH MOLY-AEROSOL
1-576:
NUCHAIN CHAIN & CABLE LUBRICANT WITH MOLY is a specially designed to provide maximum protection to wire ropes and chains of all types. Will completely penetrate into the strands of wire ropes providing the ultimate in lubrication. Does not build up on chains to attract dust or dirt, but provides complete lubrication of rollers, pins and bushings. Continued use of this product reduces chain whip, vibration and noise, also protects against galling, seizing and wears, thus adds life to chain cable and sprockets.
OXY TREAT
0-927:
This liquid is a catalyzed oxygen scavenger that quickly removes dissolved oxygen from boiler feed water. It also provides additional protection against pitting and corrosion of internal boiler surfaces when used in conjunction with scale and corrosion inhibitors. Plus, it can be mixed with other treatment products and fed into the feed water system, or fed directly into the boiler.
RUST RELEASE FOAMING PENETRATING & CUTTING OIL-AEROSOL
1-569:
RUST RELEASE is designed to be used on farm equipment, sports equipment, and industrial equipment. This fast penetrating product lubricates, displaces moisture, frees sticking parts, stops squeaks, stops rust and corrosion and provides long lasting protection.
RUTHLESS PAINT REMOVER-AEROSOL
1-558:
RUTHLESS is a USDA authorized gel base paint remover. Penetrates deep to remove paint, decals, gaskets, glue and labels from all surfaces. Washes off with water or solvent. Safe to use on metal, brick, ceramic, wood and tile surfaces. Clings to all vertical surfaces.
SLICK TEFLON PENETRATING LUBRICANT-AEROSOL
1-574:
SLICK is a USDA authorized penetrating lubricant containing TeflonÒ. Frees frozen parts, penetrates, prevents rusting, lubricates. Quickly penetrates to free rusted parts. TeflonÒ continues to lubricate after application, Contains a corrosion preventative to protect metal parts.
SLIP-NOT BELT DRESSING-AEROSOL
1-552:
SLIP-NOT BELT DRESSING is a USDA authorized resin based spray, designed specifically to reduce slippage of all types of power belts whether round, flat or V. Compatible with fabric, leather or rubber belts. Also helps clean and prolong life of belts.
SLUDGE TREAT FOR BOILERS
0-645:
This liquid steam boiler treatment is a non-phosphate dispersant and scale inhibitor designed for use as a supplement to chelant, carbonate or phosphate treatments. It removes and controls scale and other deposits caused by calcium, magnesium, barium, aluminum and iron. It also acts as a polymeric sludge conditioner and fluidizer and won’t degrade in high temperatures like other dispersants. SLUDGE TREAT is a polymeric dispersant and conditioner.
SRCC SELF RINSING COIL CLEANER-AEROSOL
1-541:
AVAILABLE IN BULK CONCENTRATE 5-541:
SRCC is formulated to penetrate in air-conditioner coils and fins to remove all types of soils. Upon contact with the surface of the coil, SRCC begins to react and flush soil to the surface. It is not necessary to rinse if applied in place to a functional unit. Moisture produced will rinse product from contacted surfaces. Rinsing is required on units that have been removed for repair or cleaning.
STEAM TREAT CORROSION PROTECTOR
0-1928:
STEAM TREAT was formulated to provide corrosion protection in steam boiler condensate systems and other associated power equipment. Regular usage provides a pH adjustment to the untreated steam condensate and prevents the formation of harmful acids. It also provides protection to return lines and reduces the iron and copper content of the condensate.
SUPER GEL STRIP PAINT AND VARNISH REMOVER-AEROSOL
0-T76018:
SUPER GEL STRIP is a quick, blistering action gel that clings to vertical surfaces. High solvency formula strips to original substrate. Water flushable or scraped away. Without attacking the substrates such as wood, metal, masonry, stone or ceramics. The blistered coatings can be scraped off or flushed away with water. SUPER GEL STRIP effectively removes gum from concrete.
SUPER KOTE PAN SEALANT AEROSOL
0-T64114:
SUPER KOTE PAN SEALANT is a rubberized flexible coating that is impervious to water and will seal out rust and corrosion in your condensation pans while reducing unwanted vibration and sound in your air conditioning systems. OTHER USES: Reduces squeaks and noise of ducts, metal walls, metal sinks, plastic piping, and seals tree-pruning wounds, seals electrical junction boxes from dust, water and fumes.
SUPER ORANGE ALL TAR, ASPHALT REMOVER-AEROSOL
1-506:
SUPER ORANGE ALL contains natural orange oil solvent to quickly cut through tar, asphalt, grease, gum, ink, decals, crayon and more. SUPER ORANGE ALL contains no petroleum distillates or alkalis. SUPER ORANGE ALL is completely biodegradable and leaves a pleasant orange fragrance during and after use.
SUPER PEN 4 PENETRARTING LUBRICANT-AEROSOL
1-550:
SUPER PEN 4 is a USDA authorized lubricating product. Formulated to quickly penetrate rust, corrosion and moisture. SUPER PEN 4 lubricates, cleans and contains rust inhibitors. SUPER PEN 4 is non-flammable and non-conductive to 30,000 volts. SUPER PEN 4 has a four way action that cleans, lubricates, penetrates and prevents rust.
SURRENDER ANTI-SEIZE-BRUSH TOP CANS
1-L639:
SURRENDER ANTI-SEIZE is a blend of paraffnic oil and solids used insures a resistance to decomposition and oxidation under extreme temperature conditions. Anti-wear and extreme pressure fortified. SURRENDER is a specialty lubricant to prevent friction wear and reduce galling and seizing of metal contact. This product has been approved by the USDA for use in meat and poultry plants where no contact with food occurs.
SURRENDER EF ANTI-SEIZE-AEROSOL
1-546:
SURRENDER EF ANTI-SEIZE SPRAY is a USDA authorized lubricant. Contains molybdenum disulfide, graphite and aluminum in a thick grease base. Helps eliminate seizing of threaded parts. Temperature service ranges from-200 F to +20000 F. Helps cool bearings. Does not contain any chlorinated or fluorinated solvents.
TOWER-CIDE
0-630:
TOWER CIDE is a water soluble microbiological growth inhibitor. This liquid additive is used to control algae, bacteria and fungi growth in recirculating commercial and industrial water cooling towers. It uses a non-volatile, polymer quat formula to restrict microbiological growth and keep cooling systems in top working condition. It can be applied to systems by slug addition at full concentration, or mixed at lower dilution rates for routine maintenance or customized applications. TOWER CIDES highly concentrated formula requires as little as 12 ppm to be effective.
TOWER TREAT H
0-1933:
TOWER TREAT H is a scale and corrosion inhibitor is specifically formulated for open recirculating cooling tower systems in areas of high hardness and high alkalinity scaling waters, it also contains an additional polymer designed to help inhibit scale and deposition in a wide variety of aqueous systems. This product can be used with an automated continuous feed system.
TOWER TREAT S
0-1935:
TOWER TREAT S is a scale and corrosion inhibitor is specifically formulated for open recirculating cooling tower systems in areas of low hardness and low alkalinity and highly corrosive scaling waters. It also contains an additional polymer dispersant designed to insure sludge and scale are easily removed from the system through a regular bleed –off program. This product can be used with an automated continuous feed system.
TUNNEL TORNADO ACID REPLACEMENT CLEANER
0-I35
TUNNEL TORNADO CONCENTRATE is a powerful yet safe multi-functional cleaner that combines the safe cleaning performance of an acid with the mildness of liquid dish soap and is safe to users and the environment. Tunnel Tornado removes Rust, Calcium (hard water scale) Soap Scum, Lime, Mold, Mildew, and Grease. Milk Stone from surfaces such as Stainless Steel, Copper, Brass, Aluminum, Concrete, Ceramic, Stone, Brick Fiberglass, Grouting, and Fabrick Rust Remover. PLEASE NOTE: this product should not be used on Marble. Test on an inconspicuous spot if uncertain. Excellent for Car Wash and Vehicle use. Tunnel Tornado is BIODEGRADABLE-SAFE TO USERS AND THE ENVIRONMENT.
WELDAID ANTI- SPATTER-AEROSOL
1-578:
WELDAID anti-spatter prevents sticking of slag and spatter on metal surfaces. Contains no silicone which can weaken welds. Paintable once rinsed with water. Quickly evaporates. Contains a non-flammable solvent carrier for extra safety.
|
|